LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1424 of 1904 2022-03-04
exchange within this timeout
period, the connection
is closed.
timeout that will be used by
default whenever the
corresponding parameter of
each command is not set.
timeout in tenth of seconds
data sending timeout. In
online mode, after this period
data are sent also if they're
less than max packet size.
timeout value in hundreds of
milliseconds
sslSRing unsolicited mode
SSLSRING enabled in the format
SSLSRING enabled in the format
permits to choose NO
CARRIER indication format
when the secure socket is
closed.