Telit Wireless Solutions LE910C series - Page 1413

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1413 of 1904 2022-03-04
Not Subject to NDA
#HTTPCFG:<prof_id>,<server_address>,<server_port>,<auth_type>,<username>,<
password>,<ssl_enabled>,<timeout>,<cid>,0,0<CR><LF>
AT#HTTPCFG=?
Test command returns the supported range of parameters <prof_id>,
<server_port>, <auth_type>, <ssl_enabled>, <timeout>, <cid> and the maximum
length of <server_address>, <username> and <password> parameters in the
format:
#HTTPCFG: (list of supported <prof_id>s),<s_length>,(list of supported
<server_port>s), (list of supported <auth_type>s),<u_length>,<p_length>,(list of
supported <ssl_enabled>s),(list of supported timeout>s),(list of supported <cid>s)
Additional info:
parameter meaning,
Name
Type
Default
Description
<s_length>
integer
-
indicating the maximum length of
parameter <server_address>.
<u_length>
integer
-
indicating the maximum length of
parameter <username>.
<p_length>
integer
-
value indicating the maximum length of
parameter <password>.