Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 320 of 1904 2022-03-04
Not Subject to NDA
If the configured port closed, URC messages will be discarded.
DTE must enable DTR line to get URC messages on Telit USB ports
and Multiplexer ports.
AT#NOPT?
Read command reports the current notification port.
AT#NOPT=?
Test command reports the available range of values for parameter <num>.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English