Telit Wireless Solutions LE910C series - Page 1744

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1744 of 1904 2022-03-04
Not Subject to NDA
This command is only applicable for Sprint version.
This setting has an effect on $GPSNMUN setting and follows the
storing operation of $GPSNMUN setting.
AT$NMEA=?
$NMEA: 0
OK
AT$GPSNMUN?
$GPSNMUN: 0,0,0,0,0,0,0
OK
AT$NMEA=1
OK
AT$GPSNMUN?
$GPSNMUN: 2,1,0,1,1,1,1
OK