LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 178 of 1904 2022-03-04
Internet Protocol version 6
Virtual <PDP_type> introduced to
handle dual IP stack UE capability
Nothing is configured (IP or IPV6 or
IPV4V6 according to +CGDCONT)
Manual reboot is required after changing.
Predefined default PDP type is dependent according to operator
requirement.
Predefined default PDP type that operator requested should not
recommended to change.
AT#OVERRIDEPDP?
Read command returns the current settings for each defined context in
the format:
#OVERRIDEPDP: <c
id>,0:<PDP_type>,1:<PDP_type>
AT#OVERRIDEPDP=?
Test command returns values supported as a compound value.
To Next Page
Loading...
