A few operators require that the devices need to bring up PDN connections
with the PDP type set as IPv6 or IP according to network type.
Profile 4 config to IPV6 only for LTE in home network and IP only for LTE in
roaming network.
AT+CGDCONT=4,"IPV4V6","apn"
OK
AT#OVERRIDEPDP=4,0,"IPV6"
OK
AT#OVERRIDEPDP=4,1,"IP"
OK
AT#REBOOT
OK
TMO Firmware example
TMO Firmware is configured default PDP type such as.
AT#OVERRIDEPDP?
#OVERRIDEPDP: 1,0:"IPV6",1:"IP"
#OVERRIDEPDP: 2,0:"IPV6",1:"IP"
#OVERRIDEPDP: 3,0:"IPV6",1:"IP"
OK
To use profile 3 as IP for LTE in home network, need to set it as follows.
AT+CGDCONT=3,"IP","apn"
OK
AT#OVERRIDEPDP=3,0,"IP"
OK
To Next Page
Loading...
