Telit Wireless Solutions LE910C series - Page 899

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 899 of 1904 2022-03-04
Not Subject to NDA
If SIMIN pin is not connected, the hot-swap function cannot be
supported.
The changed setting is applied to the next boot.
Please set as disable if you want not to use this feature.
SIMIN pin is connected and SIM is inserted.
AT#HSEN?
#HSEN: 1
OK
AT#SIMPR?
#SIMPR: 1,0,1
#SIMPR: 1,1,0
OK
Remove SIM card.
#SIMPR: 0,0
Insert SIM card.
#SIMPR: 0,1