Telit Wireless Solutions LE910C series - Page 542

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 542 of 1904 2022-03-04
Not Subject to NDA
Additional info:
Here is the list of the parameters meaning returned by the read
command.
Name
Type
Default
Description
<cipher>
integer
0
shows cipher status
Values:
0
:
cipher off
1
:
cipher on
2
:
unknown (missing network information)
<SIM/USIM
flag>
integer
0
SIM/USIM cipher status
indication
Values:
0
:
disabled
1
:
enabled
2
:
unknown (flag not read yet)
AT#CIPHIND=?
Test command reports the range for the parameter <mode>