Telit Wireless Solutions LE910C series - Page 1532

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1532 of 1904 2022-03-04
Not Subject to NDA
if username and/or password are not allowed (see AT#TCPATRUNAUTH)
the connection will close immediately.
the current settings are stored in NVM.
to start automatically the service when the module is powered-on, the
automatic PDP context activation has to be set (see AT#SGACTCFG
command).
the set command returns ERROR if the command AT#TCPATRUNL?
returns 1 as <mod> parameter or the command AT# TCPATRUND?
returns 1 as <mod> parameter
AT#TCPATRUNCFG?
Read command returns the current settings of parameters in the format:
#TCPATRUNCFG:<connId>,<instance>,<tcpPort>,<tcpHostPort>,<tcpHost>,<urcm
od>, <timeout>,<authMode>,<retryCnt>,<retryDelay>
AT#TCPATRUNCFG=?
Test command returns the supported values for the #TCPATRUNCFG parameters