LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1346 of 1904 2022-03-04
#NWDNS: <cid>,<PDNSaddress>,<SDNSaddress> [...]]
primary DNS addresses set
through AT#DNS command.
If not set, they are the
primary and secondary DNS
addresses assigned during
the PDP (or GSM) context
activation.
secondary DNS addresses
set through AT#DNS
command. If not set, they are
the primary and secondary
DNS addresses assigned
during the PDP (or GSM)
context activation.
if no <cid> is specified, the DNS addresses for all defined contexts
are returned.
issuing the command with more than 6 parameters raises an
error.
The command returns only one row of information for every
specified <cid>, even if the same <cid> is present more than once.
The command returns a row of information for every specified
<cid> whose context has been already defined. No row is returned
for a <cid> whose context has not been defined yet. Response
format is:
#NWDNS: <cid>,<PDNSaddress>,<SDNSaddress>[<CR><LF>
#NWDNS: <cid>,<PDNSaddress>,<SDNSaddress> [...]]
To Next Page
Loading...
Need help?
General
