Telit Wireless Solutions LE910C series - Page 514

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 514 of 1904 2022-03-04
Not Subject to NDA
Default value of <mode> for TMO firmwares(ST, NF-TMO) are
configured to '3' and for NTT firmwares are configured to '5' and
for KDDI firmwares are not configured and for the others are '2'.
AT#NASC?
Read command returns the current value of parameter <mode>.
AT#NASC=?
Test command returns all supported values of the parameter <mode>.