Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 888 of 1904 2022-03-04
Not Subject to NDA
<status>
integer
current SIM status
Values:
0
:
SIM not inserted
1
:
SIM inserted
Entering AT#SIMPR= returns OK but has no effect.
AT#SIMPR?
Read command reports whether the unsolicited indication #SIMPR is
currently enabled or not, along with the local and remote SIM status, in
the format:
#SIMPR: <mode>,0,<status><CR><LF>
#SIMPR: <mode>,1,<status>
If SAP functionality is not supported or enabled, the remote SIM
status is always 0.
AT#SIMPR=?
Test command reports the supported range of values for the parameter
<mode>.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English