Telit Wireless Solutions LE910C series - Page 1702

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1702 of 1904 2022-03-04
Not Subject to NDA
$GPRMC,050303.00,A,3731.303960,N,12655.781347,E,0.0,112.5,010219,6.1,W,
A,V*51
$GPRMC,050304.00,A,3731.303981,N,12655.781390,E,0.0,112.5,010219,6.1,W,
A,V*53
AT$GPSSLSR =2,3,,,,,12 (2*1000 = 100 milliseconds *12)
OK
$GPRMC,050330.00,A,3731.303989,N,12655.781568,E,0.0,59.4,010219,6.1,W,A,
V*62
$GPRMC,050332.00,A,3731.303989,N,12655.781567,E,0.0,59.4,010219,6.1,W,A,
V*6
AT$GPSSLSR =2,3,,,,,22 (3*1000 = 100 milliseconds *22)
OK
$GPRMC,062748.00,A,3731.303291,N,12655.780885,E,0.0,108.0,010219,6.1,W,
A,V*54
$GPRMC,062751.00,A,3731.303526,N,12655.781068,E,0.0,108.0,010219,6.1,W,
A,V*5D
AT$GPSNHZ?
Read command returns the currently update rate setting , in the format
$GPSNHZ: <update_rate>
AT$GPSNHZ=?
Test command reports the range of supported values for parameter
<update_rate>.
$GPSNHZ: (the supported range of <update_rate>)