Telit Wireless Solutions LE910C series - Page 1159

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1159 of 1904 2022-03-04
Not Subject to NDA
Name
Type
Default
Description
<value>
integer
N/A
gives information about the output
pin status.
Values:
0
:
output is disabled
1
:
output is enabled
The current setting is stored through #VAUXSAV.
set command will not work and always return ERROR if the WLAN
started.
AT#VAUX?
Read command reports whether the Auxiliary Voltage pin output is
currently enabled or not, in the format:
#VAUX: <value>
AT#VAUX=?
Test command reports the supported range of value for parameters <n>
and <stat>.