Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1024 of 1904 2022-03-04
Not Subject to NDA
Unsolicited fields:
Name
Type
Description
<X>
string
DTMF digit
<Y>
string
DTMF Detect type, in-band (0) or out-band (1)
The value set by command is not saved and a software or hardware
reset restores the default value. The value can be stored in NVM
using AT&W command.
LE910C1-EUX/SAX/SVX and LE910Cx-WWX cannot be stored value
in NVM using profiles.
AT#DTMF?
Read command returns the currently selected <mode> in the format:
#DTMF: <mode>
AT#DTMF=?
Test command returns the supported values of the parameter <mode>.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English