Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1031 of 1904 2022-03-04
Not Subject to NDA
Value:
0
:
<audiomode> has no effect is included only for
backward compatibility
<edge>
integer
N/A
Edge on which bit is
transmitted
Value:
0
:
<edge> has no effect is included only for
backward compatibility.
- Sample rate has to be only in I2S Mode.
- Manual reboot is required after changing.
- The setting is saved in system.
- Supported samplewidth is 16bit only.
- 48KHz sample rate is not supported in LE910Cx ThreadX.
AT#DVIEXT?
Read command reports last setting, in the format:
#DVIEXT: <config>,<samplerate>,<samplewidth>,<audiomode>,<edge>
AT#DVIEXT=?
Test command reports the range of supported values for parameters:
<config>,<samplerate>,<samplewidth>,<audiomode>,<edge>

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English