Telit Wireless Solutions LE910C series - Page 1075

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1075 of 1904 2022-03-04
Not Subject to NDA
10÷65535
:
timer value in units of
seconds
<CCFT>
integer
60
set the automatic call
termination counter T2
Value:
0÷65535
:
timer value in units of minutes
The setting is saved in NVM and it is available without reboot.
AT#ECALLTMR?
Read command reports the current parameters values.
AT#ECALLTMR=?
Test command returns the supported values of parameters <alAckPeriod>,
<signalDuration>, <sendMsdPeriod>, <msdMaxTransmitTime> and <CCFT>.
Modules supporting the command
LE910C1-NA
LE910C1-AP
LE910Cx-NF
LE910Cx-EU
LE910C1-NAD
LE910Cx-NFD