Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1093 of 1904 2022-03-04
Not Subject to NDA
If DNS settings are set, the DNS settings are kept after reboot.
If DNS settings are set to 0.0.0.0, the DNS settings are deleted.
If the setting is not maintained after firmware update.
AT#ETHCFG?
Read command returns the values in the following format
#ETHCFG:
<GWIPAdress>,<SubNetMask>,<Start_IPaddress>,<End_IPaddress>,<DNS1>,<DN
S2>
OK
AT#ETHCFG=?
Test command returns the range of supported values for all the parameters.
AT#ETHCFG=192.168.10.1,255.255.255.0,192.168.10.2,192.168.10.20,8.8.8.8

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English