Telit Wireless Solutions LE910C series - Page 1113

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1113 of 1904 2022-03-04
Not Subject to NDA
State 3 is Operate up zone
State 4 is Extreme up zone
After moving to zone with activity 3(emergency call only), only when
moving to zone with activity 0(no mitigation) the device will register
to the network.
<action> for high-zone can't be <no action> or <data throttling>.
<action> for extreme high zone can't be <no action> or <data
throttling> or <tx backoff>.