Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1162 of 1904 2022-03-04
Not Subject to NDA
1
:
enables the presentation of the temperature
monitoring URC, whenever the module internal
temperature reaches either operating or extreme
levels.
<action>
integer
1
sum of integers, each representing
the action to be done whenever the
module internal temperature
reaches either operating or
extreme levels.
Values:
0
:
no action
1
:
(01) Activating of thermal mitigation according to
thermal configuration file.
2
:
(10) Output pin <GPIO> is tied HIGH when operating
temperature bounds are reached; when the
temperature is back to normal the output pin
<GPIO> is tied LOW. If this <action> is required, it is
mandatory to set the <GPIO> parameter too.
3
:
(11) This value contains <action=1> and <action=2>
i.e. activate thermal mitigation and a GPIO
indication. If this <action> is required, it is
mandatory to set the <GPIO> parameter too.
<GPIO>
integer
-
GPIO number. Valid range is any
GPIO pin as described in #GPIO
command. This parameter is
needed and required only if
<action> 2 or 3 is enabled.
Unsolicited fields:
Name
Type
Description
<level>
integer
threshold level (see Note1)
Values:
-2
:
Extreme temperature lower bound.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English