Telit Wireless Solutions LE910C series - Page 1176

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1176 of 1904 2022-03-04
Not Subject to NDA
GSM Example:
Configure TEST EQUIPMENT to band GSM I and set ARFCN = 63, PL = 29.
AT#TESTMODE="TM"
AT#TESTMODE="SETGSMBAND 1"
AT#TESTMODE="TCH"
AT#TESTMODE="PL 29"
Verify on instrument side that TX max power level is about 31-35dBm.
AT#TESTMODE="ESC"
Configure TEST EQUIPMENT to band GSM 2 and set ARFCN = 700, PL = 26.
AT#TESTMODE="TM"
AT#TESTMODE="SETGSMBAND 2"
AT#TESTMODE="TCH"
AT#TESTMODE="PL 26"
Verify on instrument side that TX max power level is about 28-32dBm.
AT#TESTMODE="ESC"
RX test:
GSM: Inject a modulated GSM signal to the unit
AT#TESTMODE="TM"
AT#TESTMODE="SETGSMBAND 2"
AT#TESTMODE="RXON"
AT#TESTMODE="LNA 0"
AT#TESTMODE="RL"
AT#TESTMODE="ESC"
To return to online mode:
AT#TESTMODE="OM" verify that module switches to operative mode.
Verify that module switches to operative mode.
WCDMA Example:
Configure TEST EQUIPMENT in not signaling mode,