Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1202 of 1904 2022-03-04
Not Subject to NDA
Parameter returned by the read command and not described in the
previous sections.
Name
Type
Default
Description
<Did>
integer
-
Device id, currently limited to 0 (only
one device)
<State>
integer
0
ECM Backhaul connection status
Values:
0
:
disabled
1
:
enable
AT#ECMD=?
Test command returns the range of supported values for <Did>.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English