Telit Wireless Solutions LE910C series - Page 1230

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1230 of 1904 2022-03-04
Not Subject to NDA
264
:
set timeout value in 90 milliseconds
these values are automatically saved in NVM
AT#SCFG?
Read command returns the current socket configuration parameters values for all
the six sockets, in the format:
#SCFG: <connId1>,<cid1>,<pktsz1>,<maxTo1>,<connTo1>,<txTo1><CR><LF>
...
#SCFG:
<connIdconMax>,<cidconMax>,<pktszconMax>,<maxToconMax>,<connToconMax>,
<txToconMax><CR><LF>
AT#SCFG=?
Test command returns the range of supported values for all the sub parameters.
•
AT#SCFG?
#SCFG: 1,1,300,90,600,50
#SCFG: 2,2,300,90,600,50
#SCFG: 3,2,250,90,600,50
#SCFG: 4,1,300,90,600,50
#SCFG: 5,1,300,90,600,50
#SCFG: 6,1,300,90,600,50
...
OK