Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1264 of 1904 2022-03-04
Not Subject to NDA
Issuing #SI<CR> causes getting information about data traffic of all the
sockets, the response format is:
#SI: <connId1>,<sent1>,<received1>,<buff_in1>,<ack_waiting1><CR><LF>...
#SI:
<connIdconMax>,<sentconMax>,<receivedconMax>,<buff_inconMax>,<ack_wa
itingconMax>
Only if <closureType> is set to 254 and <closureTypeCmdModeEnabling> is set
to 1, AT#SI response format will be:
#SI: <connId>,<sent>,<received>,<buff_in>,<ack_waiting>,<cause>
AT#SI=?
Test command reports the range for parameter <connId>.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English