Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1276 of 1904 2022-03-04
Not Subject to NDA
Name
Type
Description
<replyId>
integer
Echo Reply number
<IpAddress>
string
IP address of the remote host
<replyTime>
integer
time, in 100 ms units, required to receive the
response
<ttl>
integer
time to live of the Echo Reply message
When the Echo Request timeout expires (no reply received on time)
the response will contain <replyTime> set to 600 and <ttl> set to
255.
To receive the corresponding Echo Reply is not required to enable
separately #ICMP
The format of IPv6 address isn't represented according to +CGPIAF
setting
If it doesn't use the pdpId, it will be tried PING by default value (See
# PROTOCOLCFG)
AT#PING=?
Test command reports the supported range of values for the #PING
command parameters.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English