Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1301 of 1904 2022-03-04
Not Subject to NDA
Therefore, if an invalid host name given to the #SKTSET command an error
message issued.
the DNS Query to be successful requests that:
- the GPRS context 1 is correctly set with +CGDCONT
- the authentication parameters are set (#USERID, #PASSW)
- the GPRS coverage is enough to permit a connection.
Issuing command #QDNS will overwrite <remote addr> setting.
AT#SKTSET?
Read command reports the socket parameters values, in the format:
AT#SKTSET: <socket type>,<remote port>,<remote addr>,<closure type>,<local
port>,<userIpType>
AT#SKTSET=?
Test command returns the allowed values for the parameters.
•
AT#SKTSET=0,1024,"www.telit.net"
OK

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English