Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1318 of 1904 2022-03-04
Not Subject to NDA
output stream is represented in lines of no more
than 76 characters each. Lines are defined as
sequences of octets separated by a CRLF
sequence.
2
:
base64 encoding compliant to RFC 3548 standard.
As indicated from RFC3548 CRLF have not to be
added.
<dec>
integer
0
selects the decoding standard. The
data received from the
<connId> socket, are decoded
according to the <dec> parameter
and forwarded to the serial port.
Values:
0
:
no decoding of data received from socket
<connId>
1
:
base64 decoding compliant to RFC 2045 - MIME
standard. Decoding of data received from socket
<connId> and sent to serial port. Same rule as for
<enc> regarding line feeds in the received file that
has to be decoded.
2
:
base64 decoding compliant to RFC 3548 standard.
Decoding of data received from socket <connId>
and sent to serial port. Same rule as for <enc>
regarding line feeds in the received file that has to
be decoded.
<unused_B>
integer
-
reserved for future use
<unused_C>
integer
-
reserved for future use
It is possible to use command to change current <enc>/<dec>
settings for a socket already opened in command mode or in
online mode after suspending it. In this last case it is necessary to
set AT#SKIPESC=1.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English