Telit Wireless Solutions LE910C series - Page 1359

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1359 of 1904 2022-03-04
Not Subject to NDA
Name
Type
Default
Description
<sentbytes>
integer
-
the number of sent bytes
<sentbytes> could be less than <bytestosend>. If data sending fails
for some reason, an error code is reported.
AT#FTPAPPEXT=?
Test command reports the supported range of values for parameters
<bytestosend> and <eof>.