Telit Wireless Solutions LE910C series - Page 1416

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1416 of 1904 2022-03-04
Not Subject to NDA
Name
Type
Default
Description
<prof_id>
integer
-
profile identifier
<http_status_code>
integer
-
status code, as received from the
server (see RFC 2616)
<content_type>
string
-
reporting the "Content-
Type" header line, as received
from the server (see RFC 2616)
<data_size>
integer
-
amount of data received from the
server. If the server doesn't
report the "Content-Length:"
header line, the parameter value
is 0.
if there are no data from server or the server doesn't answer within the
time interval specified in <timeout> parameter of #HTTPCFG command,
then the URC #HTTPRING <http_status_code> parameter has value 0.
AT#HTTPSND=?
Test command returns the supported range of parameters <prof_id>,<command>
and <data_len> and the maximum length of <resource>, <post_param> and
<extra_header_line> parameters in the format:
#HTTPSND: (list of supported <prof_id>s),(list of supported <command>s),
<r_length>, (list of supported <data_len>s),<p_length>,<m_length>
Additional info:
parameters meaning,