To Next Page

To Previous Page

LE910Cx AT Commands Reference Guide

80502ST10950A Rev. 14 Page 1430 of 1904 2022-03-04

Not Subject to NDA

if secure socket is not enabled using #SSLEN only test requests

can be made. Read command can be issued if at least a <SSId> is

enabled.

Supported CipherSuite for LE910C1-EUX/LE910C1-SAX/LE910C1-

SVX/LE910Cx-WWX -

0 - unknown

1 - TLS_RSA_WITH_AES_128_CBC_SHA

2 - TLS_RSA_WITH_AES_128_CBC_SHA256

3 - TLS_RSA_WITH_AES_256_CBC_SHA

4 - TLS_RSA_WITH_AES_256_CBC_SHA256

5 - TLS_DHE_RSA_WITH_AES_128_CBC_SHA

6 - TLS_DHE_RSA_WITH_AES_256_CBC_SHA

7 - TLS_DHE_RSA_WITH_AES_128_CBC_SHA256

8 - TLS_DHE_RSA_WITH_AES_256_CBC_SHA256

AT#SSLSECCFG?

Read command reports the currently selected parameters in the format:

#SSLSECCFG: <SSId>,<CipherSuite>,<auth_mode>[,<cert_format>]

AT#SSLSECCFG=?

Test command returns the range of supported values for all the

parameters.

#SSLSECCFG: (1),(0-10),(0-2),(0,1)

In case of LE910C1-EUX/LE910C1-SAX/LE910C1-SVX/LE910Cx-WWX,

#SSLSECCFG: (1),(0-8),(0-2),(0,1)

Telit Wireless Solutions LE910C series At Commands Reference Guide

Other manuals for Telit Wireless Solutions LE910C series