LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1451 of 1904 2022-03-04
If secure socket has not be enabled through #SSLEN command, only test
command can be used.
AT#SSLSECCFG2?
Read command reports the currently selected parameters in the format:
#SSLSECCFG2: <SSId>,<version>,0,0,0,0
AT#SSLSECCFG2=?
Test command reports the range of supported values for all the Parameters
#SSLSECCFG2: (1),(0-2),(0),(0),(0),(0)
To Next Page
Loading...
