Telit Wireless Solutions LE910C series - Page 1457

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1457 of 1904 2022-03-04
Not Subject to NDA
- any valid IP address in the format:
"xxx.xxx.xxx.xxx" any host name to be solved with
a DNS query
- any valid IPv6 address in the format:
"xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx" or
"xxx.xxx.xxx.xxx.xxx.xxx.xxx.xxx.xxx.xxx.xxx.xxx.xx
x.xxx.xxx.xxx"
<ClosureTy
pe>
intege
r
0
Closure type
Value:
0
:
only value 0 supported
<connMode
>
intege
r
1
connection mode
Values:
0
:
online mode connection
1
:
command mode connection
<Timeout>
intege
r
100
time-out in 100 ms units. It represents the
maximum allowed TCP inter-packet delay. It
means that, when more data is expected during
the handshake, the module awaits <Timeout> *
100 msecs for the next packet. If no more data
can be read, the module gives up the handshake
and raises an ERROR response.
Value:
10÷5000
:
hundreds of ms
if secure socket is not enabled using AT#SSLEN only test requests can be
made.
if timeout is not set for SSL connection the default timeout value, set by
AT#SSLCFG, is used.