Telit Wireless Solutions LE910C series - Page 1472

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1472 of 1904 2022-03-04
Not Subject to NDA
<rsrp>
integer
-
Reference Signal Received
Power
<rsrq>
integer
-
Reference Signal Received
Quality
<bandwidth>
integer
-
E-UTRA bandwidth of serving
cell
The bandwidth, <bandwidth>, of LTE neighbor cells(intra/inter)
cannot be appeared.
The value of <cellId> for LTE serving cell is replaced to cell
identifier.
<pci> is added with name of phyCellId and the cellId name for
neighbor cells were replaced to phyCellId.
The CELL_LOW_PRIORITY of <cellStatus> for LTE is not supported.
The command is executed within max. 3 minute.