Telit Wireless Solutions LE910C series - Page 1489

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1489 of 1904 2022-03-04
Not Subject to NDA
<tac>
mixed
-
Tracking Area Code. if #CSURVF last setting
is 0, <tac> is a decimal number, else it is a 4-
digits hexadecimal number
<pci>
mixed
-
physical cell identifier; if #CSURVF last
setting is 0, <pci> is a decimal number, else
it is a 4-digits hexadecimal number
<cellStatus>
integer
N/A
it is the cell status
Values:
0
:
C0 is a suitable cell (CELL_SUITABLE).
1
:
the cell is low priority based on the received system
information (CELL_LOW_PRIORITY).
2
:
the cell is forbidden (CELL_FORBIDDEN).
3
:
the cell is barred based on the received system
information (CELL_BARRED).
4
:
the cell <rxLev> is low (CELL_LOW_LEVEL).
5
:
none of the above e.g. exclusion timer running, no
BCCH available…etc.. (CELL_OTHER).
<rsrp>
integer
-
Reference Signal Received Power
<rsrq>
integer
-
Reference Signal Received Quality
<bandwidth>
integer
-
E-UTRA bandwidth of serving cell
The bandwidth, <bandwidth>, of LTE neighbor cells(intra/inter) cannot be
appeared.
The value of <cellId> for LTE serving cell is replaced to cell identifier.
<pci> is added with name of phyCellId and the cellId name for neighbor
cells were replaced to phyCellId.