Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1508 of 1904 2022-03-04
Not Subject to NDA
1
:
the cell is low priority based on the received system
information (CELL_LOW_PRIORITY).
2
:
the cell is forbidden (CELL_FORBIDDEN).
3
:
the cell is barred based on the received system
information (CELL_BARRED).
4
:
the cell <rxLev> is low (CELL_LOW_LEVEL).
5
:
none of the above e.g. exclusion timer running, no
BCCH available…etc.. (CELL_OTHER).
<rsrp>
integer
-
Reference Signal Received Power
<rsrq>
integer
-
Reference Signal Received Quality
<bandwidth>
integer
-
E-UTRA bandwidth of serving cell
The value of <bandwidth> for LTE neighbor cells(intra/inter) of same PLMN
cannot be appeared.
The CELL_LOW_PRIORITY of <cellStatus> for LTE is not supported.
The command is executed within max 3 minutes.
The information provided by #CSURVCL is the same as that provided by
#CSURVL. The difference is that the output of #CSURVCL is in numeric
format only.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English