Telit Wireless Solutions LE910C series - Page 1510

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1510 of 1904 2022-03-04
Not Subject to NDA
<e>
integer
-
ending channel
Additional info:
<uarfcn>,<rxLev>,<mcc>,<mnc>,<scrcode>,<cellId>,<lac>,<cellStatus>,<rscp>,<
ecio>
<CR><LF><CR><LF><CR><LF>
Name
Type
Default
Description
<uarfcn>
integer
-
The carrier frequency is designated by the
UTRA Absolute Radio Frequency Channel
Number
<rxLev>
integer
-
decimal number; it is the reception level (in
dBm)
<mcc>
hex
-
hexadecimal 3-digits number; it is the
mobile country code
<mnc>
hex
-
hexadecimal 2/3 digits number; it is the
mobile network code
<scrcode>
integer
-
decimal number; it is the scrambling code
<cellId>
mixed
-
cell identifier; if #CSURVF last setting is 0,
<cellId> is a decimal number, else it is a 4-
digits hexadecimal number
<lac>
mixed
-
location area code; if #CSURVF last setting
is 0, <lac> is a decimal number, else it is a 4-
digits hexadecimal number
<cellStatus>
integer
0
decimal number; it is the cell status
Values:
0
:
the cell is a suitable cell (CELL_SUITABLE)
1
:
the cell is low priority based on the received system
information (CELL_LOW_PRIORITY)