Telit Wireless Solutions LE910C series - Page 1513

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1513 of 1904 2022-03-04
Not Subject to NDA
Name
Type
Default
Description
<s>
integer
-
starting channel
<e>
string
-
ending channel
Additional info:
(For BCCH-Carrier)
arfcn: <arfcn> bsic: <bsic> rxLev: <rxLev> ber: <ber> mcc: <mcc>
mnc: <mnc> lac: <lac> cellId: <cellId> cellStatus: <cellStatus>
numArfcn: <numArfcn> arfcn: [<arfcn1> ..[ <arfcn64>]]
[numChannels: <numChannels> array: [<ba1> ..[<ba32>]] [pbcch:
<pbcch> [nom: <nom> rac: <rac> spgc: <spgc> pat: <pat> nco: <nco>
t3168: <t3168> t3192: <t3192> drxmax: <drxmax> ctrlAck: <ctrlAck>
bsCVmax: <bsCVmax> alpha: <alpha> pcMeasCh: <pcMeasCh>]]]
<CR><LF><CR><LF><CR><LF>
(For non BCCH-Carrier)
arfcn: <arfcn> rxLev: <rxLev>
Name
Type
Default
Description
<arfcn>
integer
-
C0 carrier assigned radio
channel (BCCH - Broadcast
Control Channel)
<bsic>
integer
-
base station identification
code; if #CSURVF last
setting is 0, <bsic> is a
decimal number, else it is a
2-digits octal number
<rxLev>
integer
-
decimal number; it is the
reception level (in dBm)
<ber>
integer
-
decimal number; it is the bit
error rate (in %)