Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1572 of 1904 2022-03-04
Not Subject to NDA
1
:
no more than one of these instances can
exist
<param_5+>
string
-
string parameters required by
the method, in the format
<key_i>,<value_i>. They are key-
value pairs indicating the i-th
parameter, with i=0,...,10. If the
current method does not require
input variables, these
parameters can be omitted.
<type>=2, identifies a "Method update" message format.
Name
Type
Default
Description
<param_1>
string
-
id, the identification of the method
instance
<param_2>
string
-
message, a message represents
the current status of the method
<type>=3, identifies a "Method acknowledgement" message format.
Name
Type
Default
Description
<param_1>
string
-
id, the identification of the method
instance
<param_2>
string
-
status, the integer result status
for the execution.
0 is reserved for OK
<param_3>
string
-
when status is set to non zero
value:
error message associated with
the status

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English