Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1606 of 1904 2022-03-04
Not Subject to NDA
1
:
"GET" action
2
:
"RESET" action
<Value>
string
-
contains a string, between double
quotes, with data to be set. Maximum
string length is 64 characters.
It is valid only if <Action> = 0 ("SET"
action)
<Instance>
integer
0
instance number
Value:
0,1
:
allowed values
Host Manufacturer, Host Model and Host Software application
version do not change after an OTA firmware upgrade
"GET" action is not allowed on Host Device Unique ID.
Default values, according to specification [1], are:
Instance 0:
57. HUID0 (for Host Device Unique ID)
58. HMAN0 (for Host Manufacturer)
59. HMOD0 (for Host Model)
60. HSW0 (for Host Software version)
Instance 1:
61. HUID1 (for Host Device Unique ID)
62. HMAN1 (for Host Manufacturer)
63. HMOD1 (for Host Model)
64. HSW1 (for Host Software version)
AT#HOSTODIS=?
Test command returns the supported values ranges of the parameters.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English