Telit Wireless Solutions LE910C series - Page 1677

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1677 of 1904 2022-03-04
Not Subject to NDA
<pos_mode>
integer
3
Configure MS Based
mode.
If <pos_mode> is
Autonomous the
<transport_protocol>
should be invalid.
Values:
0
:
Pure MS Assisted - Location estimate
from the network (MS Assisted mode)
1
:
MS Based - Assistance Data from the
network (MS Based mode)
2
:
Not supported
3
:
Autonomous – Autonomous GPS mode
of operation
<client_id>
string
-
String parameter
containing the ID of
the LCS-Client to
which the location
estimate is to be
transferred. Max
length is 64 bytes.
<client_id> is
mandatory in case of
A-GPS and the
<transport_protocol>
should be C-plane.
<clientid_type>
integer
N/A
Configure client ID
type.
<client_id> and
<clientid_type> are