Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1679 of 1904 2022-03-04
Not Subject to NDA
commands
$GPSNMUN.
Value:
0÷7200
:
GPS reporting period in seconds
(will be sent unsolicited). if the
value is 0 then a single shot
NMEA Message will be provided
Any value different from 0 sets
the period (in seconds) between
each NMEA Sentence
<service_type_id>
integer
255
Configure service type
id.
<service_type_id> is
mandatory in case of
A-GPS.
Value:
0÷255
:
where 255 indicates that this
parameter shall not be used
<pseudonym_indicator>
integer
N/A
Enable/disable display
user name.
Values:
0
:
display user name at the external
client
1
:
display user name as anonymous at
the external client
Additional info:
If C-plane or Supl session is not successfully completed, then an unsolicited
indication reports the error cause in the following formats:

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English