Telit Wireless Solutions LE910C series - Page 1681

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1681 of 1904 2022-03-04
Not Subject to NDA
35
MOLR Data missing
36
MOLR Facility Not Supported
37
MOLR Subscription Violation
38
MOLR Position Method Failure
39
MOLR Undefined
If <pos_mode> is Autonomous, the <transport_protocol> should be invalid.
If <transport_protocol> is C-plane and <pos_mode> is Pure MS Assisted,
then <interval> should be 0 (or omitted).
If <interval> is not set, it is assumed to be 0.
The Unsolicited NMEA sentences have to be enabled with the commands
$GPSNMUN.
The following parameters are included only for backward compatibility and
have no effect.
<client_id>, <clientid_type>, <mlc_number>, <mlcnumber_type>,
<service_type_id> and <pseudonym_indicator>
AT$GPSSLSR?
Read command returns the current settings, in the format:
$GPSSLSR:
<transport_protocol>[,<pos_mode>[,<client_id>,<clientid_type>[,<mlc_number>,<m
lcnumber_type>[,<interval> [,<service_type_id> [,<pseudonym_indicator>]]]]]]
AT$GPSSLSR=?
Returns the list of supported SLSR values for each field.