Telit Wireless Solutions LE910C series - Page 1741

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1741 of 1904 2022-03-04
Not Subject to NDA
NMEA extended data is displayed on NMEA port depending on $GPSNMUN
<enable> parameter setting.
The storage of $GPSNMUNEX setting value is following,
Setting saved
Other
The current setting is stored through $GPSSAV command.
AT$GPSNMUNEX?
Read command returns the NMEA extended sentences availability status, in the
format:
$GPSNMUNEX:
<GNGNS>,<GNGSA>,<GLGSV>,<GPGRS>,<BDGSA>,<BDGSV>,<GAGSA>,<GAGSV>,<
GPDTM>
AT$GPSNMUNEX=?
Test command returns the supported range of values for parameters
<GNGNS>,<GNGSA>,<GLGSV>,<GPGRS>,<BDGSA>,<BDGSV>,<GAGSA>,<GAGSV>
and <GPDTM>.