Telit Wireless Solutions LE910C series - Page 1833

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1833 of 1904 2022-03-04
Not Subject to NDA
t3
:
Random address
Additional info:
Asynchronous Event:
#BCONNECT: <Connection Handle>
<Connection Handle>: It specifies the connection establishment
with specified handle. The connection handle must be used as
characteristic access for this device.
Example:
#BCONNECT: 4
It supports a maximum of 4 connections in central role.
AT#BCONNECT=?
Test command returns the current address to which is connected.
AT#BCONNECT="008025D11DE4",
#BCONNECT: 1
OK