Telit Wireless Solutions LE910C series - Page 1851

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1851 of 1904 2022-03-04
Not Subject to NDA
1 - Advertising is ON with Customized
advertising being ENABLED
2 - Reserved
3 - Advertising is OFF
Attribute service/services should be created using AT#BATTRIB
command.
AT#BSRVDATAEX=?
Test command reports supported range of values for all parameters.
To set 2-byte value "4546" to GATT server characteristic with channel 0x2
for service with serviceId 0:
AT#BSRVDATAEX=0,2,"4546"
OK
To read the value of GATT server characteristic with channel 0x2 for service
with serviceId 0:
AT#BSRVDATAEX=0,2,"?"
#BSRVDATAEX: 0,2,4556