Telit Wireless Solutions LE910C series - Page 1853

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1853 of 1904 2022-03-04
Not Subject to NDA
Value:
1÷27
:
The supported parameter value range.
<Service Data>
string
N/A
It specifies the Service data to be
included in the customized
advertising data.
Service data should be provided as
HEX string.
Value:
1÷27
:
The supported parameter value range.
<128-bit Service
UUID>
hex
N/A
It specifies the 128-bit UUID to be
included in the customized
advertising data.
UUID HEX value should be 16-bit or
128-bit. If 16-bit UUID is given as
input, it is converted to 128-bit
UUID.
Value:
2÷16
:
The supported parameter value range.
Customized advertising data should be enabled using AT#BADVE
command.
AT#BADVDATA=?
Test command reports supported range of values for all parameters.