Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1856 of 1904 2022-03-04
Not Subject to NDA
<Service Data>
string
N/A
It specifies the Service data to be
included in the scan response
data.
Note: Service data should be
provided as HEX string
Value:
1÷27
:
The supported parameter value range.
<128-bit Service
UUID>
string
N/A
It specifies the 128-bit UUID to be
included in the scan response
data.
UUID HEX value should be 16-bit
or 128-bit. If 16-bit UUID is given
as input, it is converted to 128-bit
UUID.
Value:
2÷16
:
The supported parameter value range.
NOTE: Customized advertising data should be enabled using
AT#BADVE command.
AT#BSCANRSPDATA=?
Test command reports supported range of values for all parameters.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English