To Next Page

To Previous Page

LE910Cx AT Commands Reference Guide

80502ST10950A Rev. 14 Page 1889 of 1904 2022-03-04

Not Subject to NDA

<WIFIMODE> -

0 - Wi-Fi AP

1 - Wi-Fi Client

< SSID > - It specifies the SSID of the Wi-Fi

AP or Client

<CHNL> - It specifies the channel of

operation of the Wi-Fi AP or Client

<PHY MODE> -

0 - 'b-only' (2.4 GHz)

1 - 'b/g' (2.4 GHz)

2 - 'b/g/n' (2.4 GHz)

3 - 'a/n' (5 GHz)

4 - 'a/n/ac' (5 GHz)

<SECURITY> -

1 - None

2 - WPA Personal

3 - WPA WEP

4 - WPA WEP Enterprise

NOTE: Currently, AP provisioning supports

only <SECURTIY> 0 and 1

<PSK PASS PHRASE> - It specifies the PSK

of the Wi-Fi AP or Client, if the <SECURITY>

is 2

<WEP_ID> - It specifies the WEP ID of the

Wi-Fi client if the <SECURITY> is 3 or 4

<WEP_KEY> - It specifies the WEP KEY of

the Wi-Fi client if the <SECURITY> is 3 or 4

<DHCP_ENBL> - It indicates if the DHCP

server is enabled for Wi-Fi client

NOTE: Currently, only DHCP is supported for

Wi-Fi Client provisioning

AT#WNWEBPROV=?

Telit Wireless Solutions LE910C series At Commands Reference Guide

Other manuals for Telit Wireless Solutions LE910C series