PSM (Power Saving Mode) 1754
3.29.1. AT+CPSMS - Power Saving Mode Setting 1754
3.29.2. AT#PSMWDISACFG - Power Saving mode configuration 1759
3.29.3. AT#PSMCTS - Power Saving Mode CTS 1761
IMS 1763
3.30.1. AT#PDPIMSCFGE - edit PDP Profile Registry 1763
3.30.2. AT+CIREG - IMS registration state 1765
File System 1768
3.31.1. AT#WSCRIPT - Write File 1768
3.31.2. AT#RSCRIPT - Read File 1770
3.31.3. AT#LSCRIPT - List File Names 1772
3.31.4. AT#DSCRIPT - Delete File 1773
MQTT 1774
3.32.1. AT#MQEN - Enable MQTT Feature 1774
3.32.2. AT#MQSUB - Subscribe to a MQTT Topic 1776
3.32.3. AT#MQUNS - Unsubscribe from a Topic 1778
3.32.4. AT#MQPUBS - Publish ASCII String 1780
3.32.5. AT#MQCFG - Configure MQTT Parameters 1782
3.32.6. AT#MQCFG2 - Configure Additional MQTT Parameters 1785
3.32.7. AT#MQWCFG - Configure MQTT Last Will and Testament 1787
3.32.8. AT#MQTCFG - Configure Timeout Parameters for MQTT Transmission 1790
3.32.9. AT#MQSCFG - Configure MQTT SSL certs and key 1792
3.32.10. AT#MQCONN - Connect and Log in the MQTT Broker 1795
3.32.11. AT#MQDISC - Log Out and Disconnect from the MQTT Broker 1799
3.32.12. AT#MQREAD - Read Messages Received from the MQTT Broker 1801
3.32.13. AT#MQVCFG - Configure MQTT version 1804
3.32.14. AT#MQCOPP - Set CONNECT Packet Property for MQTT Transmission 1806
3.32.15. AT#MQSUPP - Set SUBSCRIBE Packet Property for MQTT Transmission 1809
3.32.16. AT#MQPUPP - Set PUBLISH Packet Property for MQTT Transmission 1812
3.32.17. AT#MQWIPP - Set WILL Property for MQTT Transmission 1815
3.32.18. AT#MQDIPP - Set DISCONNECT Packet Property for MQTT Transmission 1818
Customization Feature AT Commands 1821
3.33.1. AT#AVAHIEN - Enable/disable AVAHI service 1821
3.33.2. AT#APPRUN - Application Run 1822
Dying GASP AT Commands 1825
3.34.1. AT#DGEN - Dying GASP Configuration 1825
Bluetooth Low Energy 1830
3.35.1. AT#BI - BLE Initialize/De-initialize 1830
3.35.2. AT#BCONNECT - BLE Connect 1832
To Next Page
Loading...
Need help?
General
