Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 292 of 1904 2022-03-04
Not Subject to NDA
if a connection has been set up issuing either #SKTD or #SKTOP,
then AT&D1 has the same effect as AT&D2.
If AT&D2 been issued and the DTR has been tied Low, auto
answering is inhibited and it is possible to answer only issuing
command ATA.
If parameter is omitted, the command has the same behavior of
AT&D0.
&D3, &D4 are used for the backward compatibility, the command
has the same behaviour of AT&D0.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English